Before you buy USB3.0 FEBON198 HDMI graber card, you must check as below
1. PC hardware and OS check!
| USB2.0 HOST
CONTROLLER | USB3.0 to PCIe(Gen.2)
or
thunderbolt to USB3.0 | embedded USB3.0
intel XHCI IVY BRIDGE | embedded USB3.0
intel XHCI HASWELL ULT |
| WINDOWS XP | no work | no work | no work | no work |
WINDOWS 7 | no work | no work
| no work
| no work
|
WINDOWS 8 | no work |
ok!!!!
(NOT recommend) |
ok!!!!
(NOT recommend) | no work |
WINDOWS 8.1 |
ok!!! |
ok!!! |
ok!!!
note:(bootcamp)
mac air 2103 is ivy bridge |
ok!!!
note:(bootcamp)
mac air 2014 is Haswell |
MAC
OSX 10.8 |
no work |
OK!! |
OK!!
|
OK!!
|
MAC
OSX 10.9.4 |
no work |
OK!! |
OK!! |
OK!! |
2 . Check USB3.0 host.
If your USB3.0 is not as below, USB3.0 FEBON198 hdmi grabber card will just show 640x480 60fps
Embedded USB3.0 host requirement
1 USB3.0 host shoud be better be intel eXensible Host Controller (INTEL XHCI)
windows 8 /8.1
MAC OSX
3. HDMI VIDEO INPUT.
hdmi input
1920x1080p 60/50/30/24 fps
1366x768 60/30fps
1280x720 60/50fps
If hdmi source is 1920X1080i , USB3.0 FEBON198 UVC HDMI grabber card CAN NOT work
uvc output
1920x1080p 60/50/30/24 fps
1366x768 60/30fps
1280x720 60/50fps
Due to no scaler function,
hdmi input resolution and frame rate must be equal uvc output resolution and frame rate.
eg:
When input is 1920X1080P 60FPS, your uvc output must be 1920x1080p 60fps.
If your choice uvc output is 1920x1080p 24fps, it will no any video.
You can use MAC wirecast to control the uvc output resolution and frame rate.
