Before you buy USB3.0 FEBON198 HDMI graber card, you must check the list

 Before you buy USB3.0 FEBON198 HDMI graber card, you must check as below


1. PC hardware and OS check!

	USB2.0 HOST CONTROLLER	USB3.0 to PCIe(Gen.2)               or thunderbolt to USB3.0	embedded USB3.0 intel XHCI IVY BRIDGE	embedded USB3.0 intel XHCI HASWELL ULT
WINDOWS XP	no work	no work	no work	no work
WINDOWS 7	no work	no work	no work	no work
WINDOWS 8	no work	ok!!!! (NOT recommend)	ok!!!! (NOT recommend)	no work
WINDOWS 8.1	ok!!!	ok!!!	ok!!! note:(bootcamp) mac air 2103 is ivy bridge	ok!!! note:(bootcamp) mac air 2014 is Haswell
MAC  OSX 10.8	no work	OK!!	OK!!	OK!!
MAC  OSX 10.9.4	no work	OK!!	OK!!	OK!!

2 . Check  USB3.0 host.

If your USB3.0 is not as below, USB3.0 FEBON198 hdmi grabber card will just show 640x480 60fps





Embedded USB3.0 host requirement

1 USB3.0 host shoud be better be intel eXensible Host Controller (INTEL XHCI)

 windows 8 /8.1

MAC OSX 

3. HDMI  VIDEO INPUT.

hdmi input 

 

1920x1080p 60/50/30/24 fps 

1366x768 60/30fps

1280x720 60/50fps  

If hdmi source is 1920X1080i , USB3.0 FEBON198 UVC HDMI grabber card CAN NOT work

uvc output

1920x1080p 60/50/30/24 fps 

1366x768 60/30fps

1280x720 60/50fps  

Due to no scaler function, 

hdmi input resolution and frame rate must be equal uvc output resolution  and frame rate. 

eg: 

When input is  1920X1080P 60FPS, your uvc output must be 1920x1080p 60fps. 

If your choice uvc output is 1920x1080p 24fps, it will no any video. 

You can use MAC wirecast to control the uvc output resolution and frame rate.