網頁
▼
2014年2月28日 星期五
How to change the firmware (f/w) of UVC Grabber card.
The default firmware of uvc grabber card is as below.
auto detect NTSC or PAL.
Resolution is up to 640x480
MJPEG or YUV
Bulk mode
frame rate control
If you wan to let the resolution become 720x480 for NTSC only or 720x576 for PAL only,
you must change the firmware.
NTSC ONLY
Resolution is up to720X480
MJPEG or YUV
iso mode
frame rate control
or
PAL ONLY
Resolution is up to720X576
MJPEG or YUV
iso mode
frame rate control
How to change firmware?
Please kindly see the step by step as below.
Step 1:
To get " change firmware tools" DL
STEP 2: GO to DL\FW
STEP3: copy which f/w what you want to change.
copy it from DL\FW to DL\
copy it from DL\FW to DL\
STEP4: PLUG in the UVC Grabber card.
STEP 5: Double click the " ezWP_Download" and then Download
STEP6: When it it finish, close the problem and plug off the uvc grabber card from PC.
STEP 7: Plug in the uvc grabber card again.
The video demo is as below.
沒有留言:
張貼留言